Good Quality Reach Stacker – Good quality Reach Stacker – HONOUR SHINE
Good Quality Reach Stacker – Good quality Reach Stacker – HONOUR SHINE Detail:
Reach stacker provides services at the departure place and destination of container transportation, plays a vital role in transportation, and fully takes advantages of high efficiency and low pollution in container transportation relying on its “super-efficient, green, and energy-saving” features.
The reach stacker has such smart features as vertical lifting, active anti-rollover and traffic safety protection to provide clients with all-round protection and allow them to manipulate the reach stacker more easily.
Based on the control system developed by RTOS, the vehicle only needs 0.3s to respond with an action. Equipped with the dynamic power matching technology, the vehicle supports output power adjustment based on the load and its operating efficiency is increased by 10%. The high-speed and high-efficiency power transmission system increases the transition rate of the vehicle by 8% over the industry level.
With the optimized multi-body dynamics matching technology consuming the least force, XCS45 features a 5% weight reduction. Its low-speed and high-torque transmission system marks the best match between power and economy to save fuel consumption by 15%. It testifies XCMG’s long pursuit for lighter and more energy-efficient products.
Item |
Item |
Unit |
Parameters |
|
Lifting Performance |
Max.lifting capacity |
kg |
45000 |
|
lifting capacity |
—— |
5-5-4 |
||
Max. hoisting speed (without/with load) |
mm/s |
350/200 |
||
Max. hoisting speed (without/with load) |
mm/s |
330/260 |
||
Max. lifting height |
mm |
15100 |
||
Traveling performance |
Max. travel speed(without/with load) |
km/h |
27/23 |
|
Drive mode |
—— |
4×2 front axle drive |
||
Max. grade-ability |
% |
30% |
||
Min. turning radius |
m |
8.1 |
||
Steering mode |
—— |
rear axle steering |
||
Weight |
Curb mass |
kg |
69800 |
|
counterweight(front axle/rear axle) |
kg |
30000/39800 |
||
Dimension |
Outline dimension(L×W×H) |
mm |
11295×6208×4489 |
|
Wheel base |
mm |
6000 |
||
Track(front axle/rear axle) |
mm |
3030/2750 |
||
Min. ground clearance |
mm |
400 |
||
Approach angle/Departure angle |
° |
17.5/26.5 |
||
Power |
Engine |
Model |
—— |
QSM11 Cummins QSM11 |
Power/rotation speed |
kW/r/min |
250/2100 |
||
Emission standard |
—— |
Off-road, Euro II/ III |
||
Transmission |
Model |
—— |
ZF 5WG261 |
|
Range |
—— |
FWD 5,REV 3 |
||
Drive axle |
Model |
—— |
kessler D102PL341 |
Product detail pictures:


Related Product Guide:
Attaining consumer satisfaction is our firm's purpose for good. We'll make wonderful efforts to produce new and top-quality merchandise, meet up with your special necessities and supply you with pre-sale, on-sale and after-sale products and services for Good Quality Reach Stacker – Good quality Reach Stacker – HONOUR SHINE, The product will supply to all over the world, such as: Jeddah, Bogota, Norway, We have exported our products all over the world, especially the USA and European countries. Furthermore, all of our products are manufactured with advanced equipment and strict QC procedures to ensure high quality.If you are interested in any of our products, please don't hesitate to contact us. We will try our best to meet your needs.

The factory can meet continuously developing economic and market needs, so that their products are widely recognized and trusted, and that's why we chose this company.
